Regin
PCMTV DN50-250 - Pressure independent valve, with smart actuator
Valves intended for control of heating, cooling and air handling in larger-scale heating and cooling applications where pressure independent control valves are preferred, such as high-rise buildings, supermarkets, factories, etc. The valve has a built-in actuator.
Navigate on this page
Articles
(5 st)-
PCMTV50-65-80-F25- Supply voltage
- 24 V AC/DC (22...26V AC, 50/60 Hz / 28...32V DC)
- Power consumption
- 12 VA (25 VA max)
- Cable length
- 1 m
- Running time, actuator
- 190 s
- Connection
- Multi-flange, several DN on same flange
- Actuator connection
- Easy snap-on coupling
- Nominal diameter
- DN50, DN65, DN80
- Max. diff. pressure
- 800 kPa
- Max. start-up pressure
- 30 kPa
- Flow rate intervall setting
- 9240…25700 l/h
- Media temperature
- -20…120 °C
-
PCMTV50-65-80-F35
- Supply voltage
- 24 V AC/DC (22...26V AC, 50/60 Hz / 28...32V DC)
- Power consumption
- 12 VA (25 VA max)
- Cable length
- 1 m
- Running time, actuator
- 190 s
- Connection
- Multi-flange, several DN on same flange
- Actuator connection
- Easy snap-on coupling
- Nominal diameter
- DN50, DN65, DN80
- Max. diff. pressure
- 800 kPa
- Max. start-up pressure
- 35 kPa
- Flow rate intervall setting
- 1280…35600 l/h
- Media temperature
- -20…120 °C
-
PCMTV80-100-F72
- Supply voltage
- 24 V AC/DC (22...26V AC, 50/60 Hz / 28...32V DC)
- Power consumption
- 12 VA (25 VA max)
- Cable length
- 1 m
- Running time, actuator
- 190 s
- Connection
- Multi-flange, several DN on same flange
- Actuator connection
- Easy snap-on coupling
- Nominal diameter
- DN80, DN100
- Max. diff. pressure
- 800 kPa
- Max. start-up pressure
- 50 kPa
- Flow rate intervall setting
- 13300…72700 l/h
- Media temperature
- -20…120 °C
-
PCMTV125-150-F106
- Supply voltage
- 24 V AC/DC (22...26V AC, 50/60 Hz / 28...32V DC)
- Power consumption
- 12 VA (25 VA max)
- Cable length
- 1 m
- Running time, actuator
- 190 s
- Connection
- Multi-flange, several DN on same flange
- Actuator connection
- Easy snap-on coupling
- Nominal diameter
- DN125, DN150
- Max. diff. pressure
- 800 kPa
- Max. start-up pressure
- 35 kPa
- Flow rate intervall setting
- 23300…106000 l/h
- Media temperature
- -20…120 °C
-
PCMTV200-250-F277
- Supply voltage
- 24 V AC/DC (22...26V AC, 50/60 Hz / 28...32V DC)
- Power consumption
- 12 VA (25 VA max)
- Cable length
- 1 m
- Running time, actuator
- 317 s
- Connection
- Multi-flange, several DN on same flange
- Actuator connection
- Easy snap-on coupling
- Nominal diameter
- DN200, DN250
- Max. diff. pressure
- 800 kPa
- Max. start-up pressure
- 35 kPa
- Flow rate intervall setting
- 33100…277000 l/h
- Media temperature
- -20…120 °C
Specifications
| Protection class | IP54 |
|---|---|
| Ambient humidity (non-condensing) | 5…95 % RH |
| Application | Heating, Cooling, Ventilation, District cooling, Fan coil, Chilled beams, Radiator |
| Pressure rating | PN40 |
| Connection types | Flanged according to EN 1092-2 |
| Flow characteristics | Equal percentage, Linear |
| Leakage | 0.01 % of Kvs () |
| Media | Hot water, Cold water, Glycol-mixed water (max. 50 % glycol) |
| Max. diff. pressure | 800 kPa |
| Media temperature | -20…120 °C |
| Body | Nodular (ductile) cast iron EN-GJS-400-18 |
| Seat | Stainless steel 1.4301 |
| Plug | Stainless steel 1.4301 |
| Stem | Stainless steel 1.4305 |
| O-rings | EPDM |
| Stuffing box | Brass CW614N |
| Diaphragm | HNBR |
| Gasket | EPDM |