Regin
PDTX25-C Presigo (PDTX…-C) - Differential pressure transmitter with communication
Differential pressure transmitters, 24 V, with two universal inputs, two universal outputs and communication via Modbus.
Navigeer op deze pagina
Specificaties
Dimensions, external (WxHxD) | 167*46*130 mm |
---|---|
Max Overvoltage on any terminal | Max. ±18 V (referenced to GND) V |
Analogue output load impedance 0...10v | Min. 10 kΩ |
Pressure, range sensor | 0…2500 Pa |
Accuracy, pressure sensor 1 | ≤ 1 % full scale % |
Max. allowed diff. Pressure sensor 1 | 50 kPa |
Damping (electronic) | settable 1…12 s |
Unit. Range l/s | 0…31000 |
Unit. Range m3/h | 0…65000 (factory setting) |
Unit. Range CFM [Ft3/min] | 0…65000 |
Power Supply | 24VAC/DC (21...27 V AC 50Hz / 21...27 V DC), 4.0 VA |
---|---|
Protection class | IP54 |
Ambient humidity (non-condensing) | 0…95 % RH |
Ambient temp | -25…50 °C |
Mounting | Wall |
Media | Air, non-combustible and non-aggressive gases |
Universal inputs type (UI) | PT1000*, Ni1000, 0...10 V, Digital input |
Universal outputs type (UO) | Configuration AO (AO / DO) 0…10, Configuration DO Mosfet outputs, 24 V AC or DC, 2 A continuous, Power output Max. 2A (total UO1 + UO2) |
Cable gland | M16x1,5, M20x1,5 |
Terminal type | Screw Terminal |
Terminal wire size | 1.5 mm² |
Material, housing | Polycarbonate (PC) |
Material, base | Polycarbonate (PC) |
Software en documentatie
Productblad
Instructies
Handleidingen
Andere documentatie
Accessoires
![](/globalassets/pimmediafiles/images/ans-20.jpg?v=637980823620000000&preset=itemlistmedium)
ANS-20
2 m plastic tube and two pressure outlets (straight)